Comprehensive Wrapping Tutorial
|
| 1 |  These are the tools for wrapping the stickers. They consist of a scissors, 2 cutters, a ruler, and 1 hair-dryer. Nonetheless, a cell phone is needed.The scissors are used separately for cutting sticker while another is for trimming the wrapped sticker. |
|
| 2 |  Before wrapping the sticker, we should examine the cell phone. Look at its shape and look for the groove at the edge for latter trimming and decide the area to be covered hence the size of the sticker to be used.Then, the phone should be placed on the sticker to estimate the sticker size to be used. The sample given is using a size B sticker (small). The phone should be cleaned to ensure no dirt, grease or other unwanted material. |
|
| 3 |  Use a ruler to ensure a straight and neat cut. |
|
| 4 |  Use forceps to detach the entire sticker. |
|
| 5 |  Place the sticker above the phone without touching the surface and adjust the position of the sticker before laying it down.
Then, place it onto the surface after positioning. |
|
| 6 |  Fold the sticker down to check whether it can cover the area desired. |
|
| 7 |  Now is to attach the sticker onto the surface of the phone tightly. Press strongly to ensure firm attachment as well as rubbing to get rid of air bubbles. The sticker can always be pulled up partially whenever a bubble is spotted and attach again until all bubbles are cleared. |
|
| 8 |  Cotton buds may help to press the curved part like keypad where fingers cannot do efficiently especially. Using fingernail is not advisable as it may damage the sticker. |
|